Tone Generator w/ Probe Kit - 8134
Tone Generator w/ Probe Kit The MPI MCT-470 Pro LAN Tracer/Toner is a professional tool used to test and troubleshoot RJ11 cables and individual wires. It can be used to trace and identify individual wires or cables within a bundle or group and can perform continuity testing. The tester is composed of two individual units: the Tone Generator and the Amplifier Probe with sensing tip. Each unit is constructed of plastic and is powered by a 9 volt battery. Two 9 volt alkaline batteries are included in the packaging. The Tone Generator has a three position toggle switch, that turns the unit on in Tone or Continuity mode. A metal sheath around the switch prevents it from being accidentally turned on or off. A 3-color LED is used to indicate line polarity, continuity, and phone line condition. The Tone Generator unit has an attached pair of red and black leads ...
Tone Generator & Probe Kit
This Tone Generator is a very practical tool, which provides a single or dual tone signal, two test leads and a 4-conductor modular cable. It generates a signal from one end and traces the cables from the other by probe, even when cables are in a bundle or hidden in a mess of punch down blocks or wall plates. It is easy to be used to verify cables continuity, pair condition, line polarity and voltage in network cabling systems (Category 5 and Coax) and modular telephone lines.Tone Generator Features:2-position button for single tone or dual tone signalToggle switch to control 3 modes of operation3-color LED indicator display for telephone line polarity, continuity and voltage testingBlack and Red Aligator Clips and standard RJ-11 plug to test individual wire or RJ-11 jack Probe Features:Special inductive plastic tip, which prevents accidental shorts when using near high voltage devicesTraces and identifies wires or cable ...
Armada Technologies Pro220K Tone and Probe Kit
The Armada Technologies Pro-220K is a durable, reliable tone and probe kit designed for identifying the termination point of any wire. Used in the irrigation world, a contractor would use this kit for identifying where a particular solenoid is connected into the clock or controller. The tone sender is connected to the wire at the solenoid and activated. The banana probe is then taken to the clock and used to locate the beep-beep-beep signal. The wire making the loudest signal is the one connected to that solenoid and therefore that zones wiring is identified.
BK Precision 262 Tone and Probe Cable/ Wire Tracer Kit
Rugged, moisture resistant, Mylar cone speaker --- Tone Generator: The Tone Generator is a hand-held, battery-powered instrument designed to perform a variety of tests on telephone lines. Alligator clips and standard RJ11 plug allow the tone generator to be connected to stripped wires, a terminal panel, wall plates, or modular single line jacks quickly. --- Cable Tracer: The Line Tracer is a hand-held inductive tracer that will help to identify wires without piercing the insulation. It can trace Tone Generator signals through dry wall, wood and many other non- metal surfaces (under ideal conditions).
Eclipse 400-011 Tone Generator and Probe Kit
The Eclipse 400-011 is a Tone Generator and Probe Kit. This high-grade tone and probe set comes in a divided pouch with a belt loop and flap. Features: Use to quickly trace and identify wires or cables, even when they are in a bundle. Probe can work with any tone generator on the market. Adjustable Volume level (1-9) for various work environments. 9V batteries (included) provide up to 100 hours of use. Earphone jack provided for headset. Signal LED for strength indication Red/Black testing leads with alligator clips RJ-11 (6 position, 4 contact) standard modular jack 3-Position mode switch (OFF, CONT, and TONE) 3 LED displays (CONT, TONE and Low Battery) Single solid tone or dual alternating tone output What's In the Box: Eclipse 400-011 Tone Generator and Probe Kit
Eclipse 902-228 All-in-One Toner Probe Kit
Eclipse 902-228 All-in-One Toner Probe Kit Features: Locates cables quickly and easily locates hidden cables Isolates the right cable or pair fast Tone on live networks safely and effectively Verify conductor continuity with cable map Identify and troubleshoot cable services RJ45/RJ11/USB and Coax Applications: Copper cabling media, Including shielded (STP) and UTP cable 75 or 50 ohm Coaxial Cable 10 Base-T or 10/100 Base-T datacom networks Two conductor control, security, generic cabling POTS Telecom Service Testing Range: 1500 Meters What s in the Box: Eclipse 902-228 All-in One Toner and Probe kit
Psiber CT-15 CableTracker Probe
Probe portion of the CTK1015: The Cable Tracker Network Tone and Probe Kit model CTK1015 is designed for network managers and technicians. Toning an active LAN circuit can disrupt network traffic and is difficult to track due to cable twist and tone bleed. The Cable Tracker Network Tone and Probe Kit features a Port ID function that blinks the link light verifying cable connectivity. This feature also provides a simple and effective method to identify switch or hub port assignments on active networks. Three different blink rates are provided to ensure compatibility with equipment from a wide range of manufacturers. Traditional toning with two different tone frequencies and patterns is provided for non-active circuit tracing. Cable Tracker incorporates 3 link light activation speeds to easily identify user cable termination ports by simply looking for the blinking lights. Why three? Because Ethernet switches do not react the same to activation. Three ...
Dakota Alert Duty Cycle Probe Transmitter Custom Cabling
The Dakota Alert 2500 Wireless Vehicle Detection Kit with Rubber Hose is a driveway alarm kit that alerts you when a vehicle enters your driveway. The included hose lies across your driveway's entrance and detects vehicles that cross over it. When a vehicle drives over the hose, a signal is sent to the receiver, which then alerts you by playing one of four different tones. When the receiver is activated by the hose transmitter, one of four different tones (Classical, Westminster Chime, Ding Dong, or Whistle) sounds for a few seconds. Up to 4 zones can be monitored with additional transmitters (sold separately). Each transmitter can be programmed so to sound a different tone at the receiver, indicating which transmitter was activated. The transmitter is weatherproof with a rugged design for long-term outdoor use. It operates on one 9-volt battery. The receiver plugs into a standard wall outlet and can ...
Greenlee 801K Cable Ananlyzer Kit
Designed for more accurate wire identification, the 801K virtually eliminates power-related noise from the tone and probe operation.
Eclipse 902-299 VoIP Kit
Complete kit for data, telephone, and voice-over-internet protocol (VoIP) systemsCut and strip 4-pair UTP/STP cable, and flat satin cable using the Universal Stripper and CutterCrimp 4-pin RJ22 handset plugs, 4- and 6-pin RJ11/12 telephone plugs, and 8-pin RJ45 data plugs using the Universal Modular Plug Crimp ToolCrimp waterproof UR, UY, and UG splices using the Compression Splice Crimp ToolTerminate 110 and 66 panels and wall jacks using the Impact Punch Down ToolTap into data and telephone lines for monitoring and testing using the 8-Way Modular Adapter with all patch cables includedTone, trace and test all data, telephone, video, satellite, cable TV, and security cables with the Universal Cable Tester including USB, "F", RCA, BNC (all adapters included), and modular plug cablesTroubleshoot voice, Ethernet, and DSL systems with the data-safe Butt-in Test SetAccess panels and racks with the Can Wrench and 6-in-1 screwdriverSafely probe and move connections with the Probe ...
Psiber CTK1015 CableTracker Network ID Kit
The Cable Tracker Network Tone and Probe Kit model CTK1015 is designed for network managers and technicians. Toning an active LAN circuit can disrupt network traffic and is difficult to track due to cable twist and tone bleed. The Cable Tracker Network Tone and Probe Kit features a Port ID function that blinks the link light verifying cable connectivity. This feature also provides a simple and effective method to identify switch or hub port assignments on active networks. Three different blink rates are provided to ensure compatibility with equipment from a wide range of manufacturers. Traditional toning with two different tone frequencies and patterns is provided for non-active circuit tracing. Cable Tracker incorporates 3 link light activation speeds to easily identify user cable termination ports by simply looking for the blinking lights. Why three? Because Ethernet switches do not react the same to activation. Three speeds ensures the widest compatibility ...
Hospi-Therm Kit II Dual Scale Thermometer
MAB1249: Features: -Dual scale thermometer. -60 Second readout. -Includes storage case and 5 probe covers. -Replaceable LR41 long-life battery. -Peak temperature tone, fever alarm at 100F. -Memory recall of last reading. -Water resistant. -Instructions in English and Spanish. -1-Year limited warranty.Equipment Property:lightweight
World's Best Electric Cigarette Machine - Zen Super Shooter Electric Cigarette Injector Machine (Com
The Zen Super Shooter took what other cigarette machines have, and made it so much better. The operation is so simple. The tobacco hopper is huge. The tube grip is unmatchable. Compare to other cigarette machines, Zen gives you the most bang for your tobacco buck.
New Precision Variable Adjustable 30V 5A DC Power Supply
Best Choice Products presents to you this brand new Precision Variable Adjustable 30V 5A DC Power Supply. Our New DC Power supply kit is made with high quality variable 0-30V and current 0-5A. Extremely efficient, low noise, space saving and comes with circuit overload protection. Its made for commercial uses: mobile computer repair, universities, product development in laboratories, etc. We purchase our products straight from the manufacturer, so you know youre getting the best possible deal. -NEW PRODUCT WITH FACTORY PACKAGING (not used or refurbished). -FEATURES: All Metal construction compact design. -DC power supply, high efficient and low noise. -High precision and technology for safety and reliability. -Dual digital LCD screen for current and voltage displays. -Built-In SAMSUNG IC microcomputer control software. -High efficient transformer magnetic core conductor. -Extremely durable, high quality and lightweight. -High stabilized output voltage and short circuit protection. ...
Lomanco Power Vent Attic Fan Motor 1/10hp 1100 RPM 115 Volts # F0510B2497
A universal mounting hardware kit comes in the box with each motor to replace older models. Do not attempt to buy a new unit and pull the motor out; the mounting has changed. The conduit (flexible cable) can be used from your previous motor simply by un-screwing it and putting it on your new motor. Lomanco motor comes with Universal mounting kit to replace the flat plate (with 3 mounting holes). Lomanco motor does not have the flat plate sandwiched in between motor laminations. If your motor mounts with a belly band around the motor (5" Diameter motor), this motor should work fine. If you need a longer shaft take a look at motor #PD144, it has a 4" long shaft with similar mounting characteristics. Replacement fan blade # 14393 available. 1 Year manufacture warranty.
Fluke 80PK-18 Type K Pipe Clamp Thermocouple Probe Kit 0 - 2.5
The Fluke 80PK-18 Pipe Clamp Temperature Probe kit combines the standard 80PK-8 pipe clamp with the larger sized 80PK-10 pipe clamp, to give you a full range of measurement sizes. The Type K, thermocouples clamp securely to pipes for fast temperature and superheat measurement. The included soft carrying case allows you to conveniently keep both clamps close by for any situation.
Power Probe (PPRPPKIT03) Power Probe Master Test Kit
Features and Benefits: Includes Power Probe III, ECT2000, LS01 The last Test Kit you will ever need New Improved adapters Compatible with both 319 and ect2000 Easy to read back lit voltmeter This test kit allows the technician to perform every type of service including power injection, measurement, Ground testing, polarity checks, and continuity testing.
Fluke L215 SureGrip Kit with Probe Light and Probe Extender
Additional Detail: L200 Light; TP220 SureGrip Test Probes; TL224 SureGrip Test Lead; TP280 Test Probe Extender; Soft Foldable Pouch
Power Probe PPRBAKIT01 Master Kit Of Brake Bleeding Adapters
Features and Benefits Custom designed per vehicle manufacturer Anodized finish protects the adapter while enabling easy identification Expandable o-rings guarantee a leak proof seal every time Standard 90 degree male hose coupling fits most brake bleeders Expandable o-rings provide a leak proof seal every timeOur Master Kit is designed to match the proper master cylinder adapter to specific manufacturers providing the technician an easy installation and a leak-proof seal every time. The color coded anodizing protects the adapters from corrosive brake fluid for years and enables technicians to easily identify the correct adapter for each application. Our standard brass fittings ensure compatibility with all styles of brake bleeders and our expandable O-Rings guarantee a leak-proof seal every time.
Power Probe (PPRACC01) Power Probe Tester Accessory Kit
Features and Benefits: 20 foot extension for longer vehicles (motor homes, trailers, etc) Cigarette lighter adapter 9 extension probe Blow molded case to carry it all
Feedback
