 | Batteries | | Sealed Lead-acid User-replaceable Hot-swappable | | Status Indicators | | Includes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. Also includes 1 rear panel site wiring fault indicator. | | Package Contents | | SMART1050SLT UPS System PowerAlert Software CD-Rom USB and serial cabling User manual with warranty information | | Interfaces/Ports | | 1 x DB-9
1 x USB | | Network Management | | SNMP Manageable Optional | | Load Capacity | | 1050VA/670W | | Manufacturer | | Tripp Lite | | Standard Warranty | | 2 Year(s) | | Temperature | | 32 F (0 C) to 104 F (40 C) Operating | | Form Factor | | Tower | | Additional Information | | SMART1050SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression 1050VA / 670 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices Large internal batteries offer runtimes of 18 minutes at half load (525VA / 335 watts) and 6 minutes at full load (1050VA / 670 watts) Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110, 120 or 127V nominal output over an input voltage range of 91-145V Includes 8 fully-protected NEMA 5-15R output receptacles arranged in a single load bank that can be powered off and back on again via software interface PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands Offers simultaneous monitoring of up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise managment software is also available for select opportunities Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) 15 LEDs offer continuous detailed status information of UPS operating parameters and site power quality Hot-swappable batteries allow on-site battery replacement without powering off connected equipment UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Emissions) Listed 2 year warranty with up to $250,000 connected equipment insurance | | Backup/Run Time | | 6 Minute(s) 1050VA Full-load
18 Minute(s) 525VA Half-load | | Overload Protection | | 15A input breaker | | Plug/Connector Type | | NEMA 5-15P | | Modular Slots | | 1 x Communications Slot | | Manufacturer Part Number | | SMART1050SLT | | Power Cord/Cable | | 6 ft | | Receptacles | | 8 x NEMA 5-15R | | Alarm | | On Battery
Overload | | Humidity | | 0 to 95% Non-condensing Relative Humidity | | Manufacturer Website Address | | www.tripplite.com | | Battery Life | | 3 Year(s) to 6 Year(s) | | Input Voltage | | 110V AC | | System Requirements | | TYPICAL APPLICATIONS:Ideal for the protection of network fileservers, internetworking gear, switches, hubs, POS terminals, VOIP telephony and traditional PBX switching systems, back office computer systems, ATM machines, informational/internet/commerce kiosks, remote unattended servers, web servers, database servers, security systems, card readers, security cameras and other sensitive electronic devices requiring clean, continuously-regulated output power. | | Certifications & Standards | | UL1778 (USA), cUL (Canada), FCC Class B (emissions), IEC 1000-4-2 Level 3 (Electrostatic Discharge), IEC 1000-4-4 Level 2 (Fast Transient / Burst), IEC 1000-4-5 Level 3 (Lightning Surge), Conforms to IEEE 587 / ANSI C62.41 specifications | | Battery Recharge Time | | 4 Hour(s) | | Product Line | | SmartPro | | Dimensions | | 8.75" Height x 6.75" Width x 16.75" Depth | | Input Voltage Range | | 120V AC Single-phase | | Output Voltage | | 120V AC Single-phase | | Shipping Dimensions | | 13" Height x 10" Width x 23.75" Depth | | Product Series | | Tower | | Weight | | 43 lb | | Frequency | | 60Hz | | Product Name | | SmartPro Tower 1050SLT UPS | | Shipping Weight | | 48.5 lb | | Product Type | | Line-interactive UPS | | Waveform Type | | Sine Wave | | Filtering | | EMI / RFI |
|
|
