 | Status Indicators | | 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning |
| Package Contents | | SmartPro 700HG UPSSMART 700HG Medical Grade UPS SystemOne USB and One DB9 monitoring cableWarranty informationInstruction manual |
| Standard Warranty | | 2 Year |
| Batteries | | Sealed Lead Acid Hot-swappable |
| Load Capacity | | 700 VA/450 W |
| Manufacturer | | Tripp Lite |
| Interfaces/Ports | | 1 x DB-9
1 x USB |
| Network Management | | SNMP Manageable Optional |
| Overload Protection | | Resettable circuit breaker |
| Temperature | | 32°F (0°C) to 104°F (40°C) Operating |
| Plug/Connector Type | | NEMA 5-15P |
| Form Factor | | Wall-mountable Tower |
| Backup/Run Time | | 0.30 Hour 494.97 W Full Load
0.70 Hour 247.49 W Half Load |
| Manufacturer Part Number | | SMART700HG |
| Additional Information | | Ideal UPS protection for applications in medical patient-care areas where UL2601-1 listed medical electrical equipment is required Maintains less than 300 microamps leakage current for UPS and all connected equipment Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections Full line isolation offers a higher degree of safety and prevents operational problems in sensitive electronic equipment Resistant to electrostatic discharge Supports loads up to 700VA / 450 watts 42 minutes half load runtime (with 350VA load), 18 minutes full load runtime (with 700VA load) 4 protected hospital-grade outlets; 6-ft. cord RS-232 and USB monitoring ports for remote monitoring and unattended shutdown SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory PowerAlert unattended shutdown software available via free download from www.tripplite.com (cabling included) Complete surge protection, line isolation and EMI/RFI noise filtering 2 year product warranty 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace Battery replacement door Grounding lug |
| Battery Life | | 26297.44 Hour to 52594.88 Hour |
| Humidity | | 0 to 95% Non-condensing Relative Humidity Operating |
| Power Cord/Cable | | 72" |
| System Requirements | | TYPICAL APPLICATIONS: UL 2601-1 listed UPS provides ultimate safety and reliability for patient point of care solutions, telemedicine, nurse's stations, wireless communications systems, electronic prescribing applications, medical imaging and mission critical equipment. Not recommended for life support applications. |
| Alarm | | On Battery
Overload
Low Battery |
| Receptacles | | 4 x NEMA 5-15R |
| Input Voltage | | 110 V AC |
| Manufacturer Website Address | | www.tripplite.com |
| Dimensions | | 12.50" Height x 7" Width x 9" Depth |
| Certifications & Standards | | UL1778 (USA, Series AGSM700PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications |
| Input Voltage Range | | 120 V AC Single-phase |
| Battery Recharge Time | | 4 Hour |
| Brand Name | | Tripp Lite |
| Output Voltage | | 120 V AC Single-phase |
| Product Line | | SmartPro |
| Shipping Dimensions | | 17.25" Height x 13.25" Width x 11.75" Depth |
| Weight | | 44 lb |
| Frequency | | 60 Hz |
| Shipping Weight | | 49 lb |
| Product Name | | SmartPro 700HG UPS |
| Product Type | | Line-interactive UPS |
| Filtering | | EMI/RFI |
