| Product Summary | | Manufacturer: Tripp Lite | | Mfg Part#: SMART1000RM2U | | UPC: 00037332118806 | | Buy.com Sku: 10360302 | | Item#: CK353K | | Buy.com Sales Rank: 82274 | | See more in Uninterruptible Power Supplies | |
| Need Help? Order by Phone 1-800-800-0800 |
|
|
|
| | | Tripp Lite's SMART 1000RM2U intelligent, line-interactive sine wave rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large internal batteries offer 17 minutes half load runtime and 7 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts and overvoltages from 83 to 147V. 1000VA/700 watt power handling capability and full time sine wave output supports networking, telecom and other sensitive electronic applications. Includes a total of 6 outlets arranged in 2 load banks that are individually controllable via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS and site power conditions via built-in network accessory card slot, USB and DB9 serial monitoring ports. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications ports support messaging of detailed UPS operating parameters and line power status. Includes PowerAlert UPS monitoring and unattended shutdown software with management support for an unlimited number
| | Features |  | Manufacturer | | Tripp Lite |  | Load Capacity | | 1000 VA/700 W |  | Package Contents | | SmartPro 1000RM2U UPSSMART 1000RM2U UPS SystemMounting hardware for 4 post rackmount installationCabling for USB & DB9 monitoring and EPO switchingPowerAlert unattended shutdown and UPS/Power monitoring softwareWarranty information |  | Interfaces/Ports | | 1 x DB-9 1 x USB |  | Input Voltage | | 110 V AC |  | Form Factor | | 2U Rack-mountable |  | Plug/Connector Type | | NEMA 5-15P |  | Manufacturer Part Number | | SMART1000RM2U |  | Batteries | | Sealed Lead Acid User-replaceable Hot-swappable |  | Network Management | | SNMP Manageable Optional |  | Standard Warranty | | 2 Year |  | Dimensions | | 3.50" Height x 17.50" Width x 13.50" Depth |  | Manufacturer Website Address | | www.tripplite.com |  | Backup/Run Time | | 0.15 Hour 707.11 W Full Load 0.35 Hour 353.55 W Half Load |  | Input Voltage Range | | 120 V AC Single-phase |  | Receptacles | | 6 x NEMA 5-15R |  | Battery Recharge Time | | 4 Hour Minimum |  | Output Voltage | | 120 V AC Single-phase |  | Weight | | 35 lb |  | Product Line | | SmartPro |  | Product Name | | SmartPro 1000RM2U UPS |  | Product Type | | Line-interactive UPS |
| | Tech Specs |  | Network Management | | SNMP Manageable Optional |  | Interfaces/Ports | | 1 x DB-9 1 x USB |  | Batteries | | Sealed Lead Acid User-replaceable Hot-swappable |  | Load Capacity | | 1000 VA/700 W |  | Manufacturer | | Tripp Lite |  | Status Indicators | | 5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED. |  | Package Contents | | SmartPro 1000RM2U UPSSMART 1000RM2U UPS SystemMounting hardware for 4 post rackmount installationCabling for USB & DB9 monitoring and EPO switchingPowerAlert unattended shutdown and UPS/Power monitoring softwareWarranty information |  | Standard Warranty | | 2 Year |  | Form Factor | | 2U Rack-mountable |  | Additional Information | | SMART1000RM2U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network grade AC surge suppression 1000VA / 700 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post rackmount mountable with optional 2POSTRMKIT accessory, upright tower installation supported with optional 2-9USTAND accessory Large internal batteries offer runtimes of 21 minutes at half load (500VA / 350 watts) and 9 minutes at full load (1000VA / 700 watts) Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V Includes 6 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank) that can be powered off and back on again via software interface PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunies Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter Emergency Power Off (EPO) interface with cable Multi-function audible alarms and set of 5 front panel LEDs Network-grade AC surge suppression Attractive all-black color scheme UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary Two year warranty with $250,000 connected equipment insurance (USA & Canada only) |  | Manufacturer Part Number | | SMART1000RM2U |  | Backup/Run Time | | 0.15 Hour 707.11 W Full Load 0.35 Hour 353.55 W Half Load |  | Modular Slots | | 1 x Communications Slot |  | Temperature | | 32°F (0°C) to 104°F (40°C) Operating |  | Plug/Connector Type | | NEMA 5-15P |  | Overload Protection | | 15A input breaker |  | Receptacles | | 6 x NEMA 5-15R |  | Input Voltage | | 110 V AC |  | Manufacturer Website Address | | www.tripplite.com |  | Power Cord/Cable | | 10 ft |  | Battery Life | | 26297.44 Hour to 52594.88 Hour |  | Humidity | | 0 to 95% Non-condensing Relative Humidity |  | Alarm | | On Battery Overload Low Battery |  | System Requirements | | TYPICAL APPLICATIONS: Ideal for rackmount or upright tower protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems. |  | Dimensions | | 3.50" Height x 17.50" Width x 13.50" Depth |  | Certifications & Standards | | UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications |  | Input Voltage Range | | 120 V AC Single-phase |  | Battery Recharge Time | | 4 Hour Minimum |  | Brand Name | | Tripp Lite |  | Output Voltage | | 120 V AC Single-phase |  | Product Line | | SmartPro |  | Emergency Power OFF | | Yes |  | Shipping Dimensions | | 9" Height x 24" Width x 20.25" Depth |  | Weight | | 35 lb |  | Frequency | | 60 Hz |  | Shipping Weight | | 41.50 lb |  | Product Name | | SmartPro 1000RM2U UPS |  | Product Type | | Line-interactive UPS |  | Waveform Type | | Sine Wave |  | Filtering | | EMI / RFI |
|
| |
|
|