| | | TRENDnet's TE100-P1P 10/100Mbps Mini Parallel Port Print Server is designed to transform virtually all stand-alone parallel port printer into a shared resource on your network. TE100-P1P has a 10/100Mbps auto-sensing RJ-45 port, which connects to either 10Mbps or 100Mbps network. With its "Automatic IP" feature, the Print Server will automatically configure its IP address, making installation quick and easy. For advanced management, you can configure the print server using the Windows-Based Wizard, Admin Software or Web Browser. Also, the TE100-P1P supports Internet Printing Protocol, so users can print remotely to the parallel printer via the Internet. Compact in design, but packed with features the TE100-P1P is the most cost effective way to add a parallel printer anywhere on your network!
| | Features |  | Interfaces/Ports | | 1 x RJ-45 10/100Base-TX Auto-sensing Network
1 x 36-pin Centronics Parallel Printer | | Manufacturer | | TRENDnet | | Form Factor | | External Plug-in Module | | Manufacturer Part Number | | TE100-P1P | | Standard Warranty | | 3 Year(s) | | Manufacturer Website Address | | www.trendnet.com | | Data Transfer Rate | | 10Mbps Ethernet @ 328 ft
100Mbps Fast Ethernet @ 328 ft | | Product Name | | TE100-P1P Print Server | | Packaged Quantity | | 1 |
| | Tech Specs | | Controls | | Reset Switch | | Management | | Easy Configuration through BiAdmin (Windows Application) Web-based management (HTTP) PC-based SNMP applications FTP Telnet | | Interfaces/Ports | | 1 x RJ-45 10/100Base-TX Auto-sensing Network
1 x 36-pin Centronics Parallel Printer | | Manufacturer | | TRENDnet | | Temperature | | 0 C (32 F) to 40 C (104 F) Operating
-10 C (14 F) to 70 C (158 F) Storage | | Connectivity Media | | Category 3, 4, 5 UTP/STP 10Base-T
Category 5 UTP/STP 100Base-TX | | Input Voltage | | 9 V DC | | Manufacturer Part Number | | TE100-P1P | | Standard Warranty | | 3 Year(s) | | Protocols | | DHCP
HTTP
FTP
SNMP
Telnet
LPD
SMB
IPP
EtherTalk
NDPS
LPR
TCP/IP
NetBEUI
IPX/SPX
AppleTalk | | Status Indicators | | 10BaseT 100BaseTx Status Error | | Additional Information | | Acts as a DHCP client or use "Auto-IP" to self-assign an IP address automatically Upgradeable Firmware Printer Interface: IEEE1284 Type B (DB-36) Centronics (Nibble/Byte mode support) External Power Adapter | | Humidity | | 10 to 80% Operating
5 to 90% Storage | | Input Current | | 500 mA | | Data Transfer Rate | | 10Mbps Ethernet @ 328 ft
100Mbps Fast Ethernet @ 328 ft | | Manufacturer Website Address | | www.trendnet.com | | Form Factor | | External Plug-in Module | | Dimensions | | 1" Height x 2.2" Width x 3.4" Depth | | Compatibility | | Windows 9x/NT/Me/2000/XP Macintosh (OS 9.x and higher) Unix Netware 3.x/4.x/5.x | | Shipping Dimensions | | 2.75" Height x 5.75" Width x 8.75" Depth | | Certifications & Standards | | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX ANSI/IEEE 802.3 Auto-Negotiation FCC CE VCCI C-Tick | | Weight | | 2.5 oz | | Product Name | | TE100-P1P Print Server | | Shipping Weight | | 1.22 lb | | Packaged Quantity | | 1 |
|
| |
|
|
Essentials
__USERID__
http://www.buy.com/prod/trendnet-te100-p1p-10-100mbps-parallel-print-server-trendnet-te100-p1p/q/loc/101/10333154.html
| Customer Reviews | ![]() | | Value |  4.5 | | Performance | 4.5 | | Ease of Use | 4.5 | | Overall Satisfaction |  4 |
| |
5 of 5 Works as advertised Monday, September 08, 2008
Jim from Black Hawk SD
Works great, easy to setup Was this review helpful?  
3 of 5 simple product...great performance (update) Tuesday, April 08, 2008
A Customer from Houston, TX
Trendnet would not send my rebate, saying that I was missing one of the requirements. The product is still great, but not as great a deal without the rebate. Was this review helpful?
5 of 5 simple product...great performance Thursday, March 27, 2008
A Customer from Houston, TX
This product is very simple to install and use. Just follow the instruction manual, and you'll have the printer server setup in no time. I did not have to deal with customer service at all if that is any benefit. Was this review helpful?
5 of 5 Simple install Wednesday, March 26, 2008
Mike from Green Bay, WI
Very simple to install. Just follow the instruction booklet and you are golden. Was this review helpful?
5 of 5 Great product... great deal... Monday, March 24, 2008
A Customer from Milwaukee, WI
A word of advice... visit the website of the company and get their installation directions... the set up is not covered well in the information you get. There is one online if you search the tech doc.s at trendwear website... enjoy having your printer always read to go for under $50.00... Was this review helpful?
5 of 5 Best value product, outstanding customer service! Tuesday, March 18, 2008
A Customer from Monroe, NJ
The TRENDnet TE100-P1P took a little effort to set up, but was well worth the price. The sketchy user's manual was more than made up by a very competent help desk expert. Amazingly, these folks are available 24/7 (I called at 10pm on a Saturday), no extra charge, and no hassles in getting some dingbat answering the phone to connect you to someone knowledgeable. After a quick switch of IP address to the proper subnet that fit my particular router, the friendly technician also determined that a problem I had in getting settings to stick related to a necessary firmware upgrade, which he helped me with and got me on-line and printing within 15 minutes. That alone saved me hours of debugging! The product works great on a mixed Mac/PC home network, and is happily interfacing to my old non-postcript HP Laserjet 4L... which I'm accessing through Mac OS X 10.4 via gimp print. Overall... an excellent value for a great product! Was this review helpful?
5 of 5 Parallel Printer Server Monday, March 17, 2008
kthorne65 from Parkersburg, Iowa
This is a great product. As usual I had a great shopping experience with Buy.com. Great delivery, great prices. Was this review helpful?
5 of 5 Good item, but I wouldn't pay full price Monday, March 17, 2008
ray from Ann Arbor, MI
Works well. It is a little too tall to fit in my HP 2200D but I think it would fit in most printers. I bought an extension cable and that works fine. The CD that comes with it is useful when configuring the print server and when configuring the computers on your network to print to your network printer. By default the IP address is 192.168.0.1, so if you have a D Link router you will have to connect your PC directly to the print server to change the IP address. Was this review helpful?
1 of 5 Beware of their Tech Support Thursday, March 13, 2008
D. from Austin, TX
I was anxious to install and use this print server. I am sill having trouble with its functionality. I contacted their 24/7 tech support and was told they would have to call me back. No call back. 2nd call same thing but they called back 4 days later and left a message in the middle of the night. 3rd call problem got pushed to 2nd level support and 3 days later they call back. Very poor support and the problem is still not fixed because they claim they are sending me an email with instructions for the fix and it never arrives. Was this review helpful?
5 of 5 Piece of cake! Tuesday, March 11, 2008
A Customer from Green Bay, WI
Plug it in, follow directions. Done. Was this review helpful?
4 of 5 Great Product for the money. Tuesday, March 04, 2008
A Customer from Marlboro, NJ
Got it quickly, but unfortunately the print svr was abit bulky, I have two legacy printers (Lexmark Z42 & HP Laserjet 5L) with the parallel port set into a well-like space - the print server did not fit in the Lexmark at all, but I was able to attach it to the HP, the housing around it was not attached and was flexible. After attaching it - I had no problems getting it to work and being seen by the network. Great product for the price (too bad about port location on the printers).
Was this review helpful? |
|
