 | Host Interface | | PCI |
| Manufacturer | | Startech Computer Products |
| Form Factor | | Internal |
| Management | | Includes Wake On LAN (WOL) feature that allows users to configure network adapters that are capable of monitoring network packets, even when the computer is turned off. ACPI |
| Connectivity Media | | 10/100Base-TX |
| Status Indicators | | Two LEDs to indicate network link/activity and 10/100Mbps selection. |
| Additional Information | | Built-in FIFO buffers to eliminate external memory. Auto-setups IRQ and I/O address. Supports early interrupt on transmit to increase performance |
| Standard Warranty | | Lifetime Limited |
| Protocols | | Ethernet
Fast Ethernet
CSMA/CD
TCP/IP |
| Manufacturer Part Number | | ST100SW |
| Dimensions | | 2.48" Height x 4.72" Depth |
| Interfaces/Ports | | 1 x RJ-45 10/100Base-TX Auto-negotiating |
| Temperature | | 32 F (0 C) to 131 F (55 C) Operating |
| Boot ROM/PROM | | Supports enhanced smart remote Boot ROM (optional) (BOOTPROM100S) |
| System Requirements | | OS Required: UNIX Microsoft Windows 95/98 Novell NetWare 3.x Novell NetWare 4.x Linux Microsoft Windows NT Microsoft LAN Manager |
| Shipping Dimensions | | 1.25" Height x 6.5" Width x 9.00" Depth |
| Data Transfer Rate | | 100Mbps Fast Ethernet Half/Full-duplex
10Mbps Ethernet Half/Full-duplex |
| Manufacturer Website Address | | www.startech.com |
| Humidity | | 10% to 90% Non-condensing Operating |
| Compatibility | | Plug and PlayDrivers: ODI driver for NetWare 3.x/4.x NDIS driver for LAN Manager Windows 95 Windows 98 Windows NT Packet Driver for TCP/IP software |
| Shipping Weight | | 0.34 lb |
| Certifications & Standards | | FCC Class B CE Mark IEEE 802.3/802.3u |
| Platform Support | | PC
Mac |
| Product Name | | Network Adapter |
| Product Type | | Network Interface Card |
5
