150 watts RMS per channel power amplifier with complete custom installer feature set Bridgeable outputs for 470 watts RMS total output power Toroidal Power Supply 2 stereo low-level (RCA) inputs and one high-level (speaker) input, and one auxiliary low-level output Automatic source switching with adjustable delay timer (3-15 seconds) Two sets of speaker outputs selectable from the front panel Rear mounted L/R main volume controls with front mounted volume and balance trim controls Flexible Power-on: Switched, Signal Sensing, and 12v trigger 5 way speaker wire binding posts for bare wire or Banana plugs
Features
Standard Warranty
2 Year Limited
Manufacturer
Rodin
Manufacturer Part Number
AMP-300
Output Power
2 x 150 W RMS (20 Hz to 20 kHz) @ 8 Ohm 0.2% THD+N 2 x 235 W RMS (20 Hz to 20 kHz) @ 4 Ohm 0.2% THD+N 2 x 470 W RMS (20 Hz to 20 kHz) @ 8 Ohm 0.2% THD+N - Bridged
Weight
28.60 lb
Sound System
Not Applicable
Manufacturer Website Address
www.phoenixgold.com
Signal to Noise Ratio (SNR)
-103 dB
Product Model
AMP-300
Product Name
AudioSource AMP-300 Amplifier
Product Type
Amplifier
Tech Specs
Standard Warranty
2 Year Limited
Interfaces/Ports
2 x RCA Stereo Audio Line In - Rear 1 x RCA Stereo Audio Line Out - Rear 2 x Speaker Terminal - Rear 4 x Banana Receptacle Speaker Terminal - Rear
Manufacturer
Rodin
Output Power
2 x 150 W RMS (20 Hz to 20 kHz) @ 8 Ohm 0.2% THD+N 2 x 235 W RMS (20 Hz to 20 kHz) @ 4 Ohm 0.2% THD+N 2 x 470 W RMS (20 Hz to 20 kHz) @ 8 Ohm 0.2% THD+N - Bridged
Station Presets
Not Applicable
Manufacturer Part Number
AMP-300
Additional Information
Crosstalk: >65dB at 1kHz, refer to rated power into 8 ohms
