30 watts RMS per channel into 8 Ohms, all channels driven 42 watts RMS per channel into 4 Ohms, all channels driven adjacent channels are bridgeable to 80 watts RMS into 8 Ohms, all channels driven unique BusMatrix selector allows four configurable options for each channel: left bus, right bus, left plus right bus (mono), or the channel's dedicated input three turn-on modes: music sense, voltage trigger and manual voltage trigger input accepts 3-30V AC/DC binding posts spaced to accommodate dual banana plugs 6 independent turn-on circuits for multi-zone applications independent level controls for each channel cascade outputs for "daisy-chaining" amplifiers independent protection circuits for each channel removable 2-wire line cord UL/CSA approved
Features
Standard Warranty
2 Year Limited
Manufacturer
Niles Audio Corporation
Channels
12 Channel
Input Voltage
120 V AC
Output Power
12 x 30 W RMS @ 8 Ohm 12 x 37 W RMS @ 4 Ohm 80 W RMS @ 8 Ohm - Bridged
Dimensions
5.50" Height x 17" Width x 15" Depth - (Including Feet)
Manufacturer Part Number
SI1230
Manufacturer Website Address
www.nilesaudio.com
Frequency
60 Hz
Product Model
SI-1230
Product Name
SI-1230 Power Amplifier
Product Type
Amplifier
Tech Specs
Channels
12 Channel
Interfaces/Ports
Bridge Out - Rear Bus Input - Rear 3.5mm Jack - Rear 12 x Binding Post Speaker Terminal - Rear 12 x RCA Audio Out - Rear
Manufacturer
Niles Audio Corporation
Input Voltage
120 V AC
Standard Warranty
2 Year Limited
Output Power
12 x 30 W RMS @ 8 Ohm 12 x 37 W RMS @ 4 Ohm 80 W RMS @ 8 Ohm - Bridged
Dimensions
5.50" Height x 17" Width x 15" Depth - (Including Feet)
Manufacturer Part Number
SI1230
Additional Information
Features:
Advanced 12 Channel Configurable Amplifier, Designed For Use In Distributed Audio Systems
All Channels Are Stable Into Low-impedance Loads (4 Ohms)
Assignable Buss And Dedicated Input For Each Channel
