| Product Summary | | Manufacturer: Linksys | | Mfg Part#: WET610N | | UPC: 00745883586615 | | Buy.com Sku: 210678905 | | Item#: | | Buy.com Sales Rank: 761 | | See more in Wireless Bridges | |
| Need Help? Order by Phone 1-800-800-0800 |
|
|
|
| | | The versatile Wireless-N Ethernet Bridge can make any wired Ethernet-equipped device a part of your wireless network. At home, use the video-optimized Bridge to connect digital video recorders, set-top boxes, or computers to your Wireless-N network. In the office, convert your wired-Ethernet printer, scanner, camera, network storage device, notebook, or desktop for wireless connectivity. Since the Bridge is based on dual-band Wireless-N, it works with any device supporting Wi-Fi standards, and is compatible with Wireless-G, -A, and -B.
The Wireless-N Ethernet Bridge works on any platform and under any operating system! Since there's no drivers to load, setup is a snap -- configure the network settings through your PC's web browser, then plug it into your device and go.
To protect your data and privacy, all wireless transmissions can be encrypted with industrial-strength Wi-Fi Protected Access (WPA) security. Wi-Fi Protected Setup™ helps make secure connections pushbutton simple. Let the Wireless-N Ethernet Bridge from Linksys open up new possibilities for your wireless network.
| | Features |  | Special circuitry helps create a strong, stable link to reduce video glitches | | Converts wired-Ethernet devices to Wireless-N network connectivity | | Works with Windows, Macintosh, and Linux computers, Media Center Extenders, DVRs, NAS devices – anything with an Ethernet port! | | Wireless-N technology uses multiple radios per band to create robust signals for better range and speed, with reduced dead spots | | Operates in the 2.4 or 5GHz radio bands to minimize interference | | Wi-Fi Protected Setup™ helps make secure connections pushbutton simple |
| | Tech Specs | | Standards: IEEE 802.3u, 802.11g, 802.11b, 802.11a, draft 802.11n | | | | Buttons: Reset, Wi-Fi Protected Setup™ | | |
|
| |
|
|
__USERID__
http://www.buy.com/prod/linksys-by-cisco-wet610n-wireless-n-ethernet-bridge-with-dual-band/q/loc/101/210678905.html
|
|
|
| Customer Reviews |  | | Value |  5 | | Performance | 5 | | Ease of Use |  4.5 | | Overall Satisfaction | 5 |
| |
1 of 1 customers found this review helpful.
5 of 5 Linksys WET610N Bridge Review - Works Well for Me Monday, April 20, 2009
JRF from Sharpsburg, GA
Purchased to use with a Linksys WRT610N router over the 5ghz media band to get DirecTV On Demand to an HR22 PVR.
Connection to the 610N router through Windows XP Pro was done easily with no problems.
The bridge is 35-40 feet from the router (with a wall in- between). Monitoring the device shows that it is only getting 35% signal strength. Don't know if that is good or bad or if the presumed low value is due to the router or bridge, but it does work well regardless. The On Demand video streams immediately and seamlessly with no lag time. It does exactly what I wanted it to do so I am very happy with the setup.
Was this review helpful?  
5 of 5 Follow the Directions Monday, April 20, 2009
A Customer from Tuttle OK
Worked as expected and has never failed me. I use it to allow my DirecTV SB to down load show, movies etc. Was this review helpful?
1 of 1 customers found this review helpful.
5 of 5 Excellent device Saturday, April 18, 2009
Dave from Fairfax, VA
Purchased the Linksys WET610N Wireless-N Ethernet Bridge to connect my DirecTV HD-DVR to my home network. This device works flawlessly. Was this review helpful?
5 of 5 Works fine, but... Saturday, April 11, 2009
A Customer from Carlsbad, CA
This wireless bridge works fine, but the installation program would not run with 64-bit Vista (as advertised by Linksys). Installation ran fine with Windows XP. And a Vista computer will not reconnect with it after resuming from "sleep" mode. See Microsoft article ID 956119; it is a Vista problem, not a fault with Linksys. Was this review helpful?
1 of 1 customers found this review helpful.
5 of 5 excellent support Monday, March 30, 2009
Susan Tenpas from Whitmore Lake, MI
We needed the device to connect our Sony TV to the internet because we didn't want to move our cable box downstairs. We initially tried a powerline ethernet adaptor but were dissatisfied with the speed.
We have a new LinkSys router but it did not want to recognize the WET610N bridge. LinkSys support answered promptly and was extremely patient and helpful. I wound up being transfered to advance support and they not only modified the settings on our Bridge but even helped me modify the settings on the TV.
I can't say the set up was easy, but tech support was excellent and once set up the bridge is working beautifully and the TV receives and displays movies with no need to pause to keep up. Was this review helpful?
3 of 3 customers found this review helpful.
5 of 5 Works Great Tuesday, March 24, 2009
A Customer from St. Louis, MO
I have it setup to receive wireless signal and connected to a switch for multiple devices to use. The setup was easy and performance is more then fast enough for basic home use. Further I have yet to experience any periods of slow network performance or loss of signal. If you are looking for an easy, cheap way to get internet to a portion of the house that is far away from the modem/router, this is the way to go. Was this review helpful?
|
Look For Similar Products By Category |
