Kingston HyperX 6GB (3 X 2GB) DDR3 CL7 1333MHz SDRAM 240-pin Desktop Memory

Product Summary

Print this Page | Email a Friend | Add to Wishlist | PermaLink

Manufacturer: Kingston

Mfg Part#: KHX1333C7D3K3/6GX

Buy.com Sku: 211987374

UPC: 740617163384

UPC 14: 00740617163384

See more in Computer Memory

Kingston's KHX1333C7D3K3/6GX is a kit of three 256M x 64-bit 2GB (2048MB) DDR3-1333MHz CL7 SDRAM (Synchronous DRAM) memory modules, based on sixteen 128M x 8-bit DDR3 FBGA components per module. Each module kit supports Intel XMP (Extreme Memory Profiles). Total kit capacity is 6GB. Each module pair has been tested to run at DDR3-1333MHz at a low latency timing of 7-7-7-20 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333MHz timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers and requires +1.5V.

Performance:

CL(IDD): 9 Cycles

Row Cycle Time (tRCmin): 49.5ns (min.)

Refresh to Active/Refresh Command Time (tRFCmin): 110ns

Row Active Time (tRASmin): 36ns (min.)

Power: 1.8000 W (operating per module)

UL Rating: 94 V - 0

Operating Temperature: 0 Celsius to 85 Celsius

Storage Temperature: -55 Celsius to +100 Celsius

Kingston HyperX memory is designed based on the latest DDR specifications available, and is 100% tested at Kingston's flagship factories. Plus, these Kingston modules come with the standard Kingston lifetime warranty and toll-free Tech Support. Built with the best-quality components, Kingston HyperX is competitively priced and is the choice for the serious gamer.

Features

	JEDEC standard 1.5V ± 0.075V Power Supply
	VDDQ = 1.5V ± 0.075V
	667MHz fCK for 1333Mb/sec/pin
	8 independent internal bank
	Programmable CAS Latency: 5,6,7,8,9,10
	Posted CAS
	Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
	Programmable CAS Write Latency(CWL) = 7(DDR3-1333)
	8-bit pre-fetch
	Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4
	which does not allow seamless read or write [either on the fly using A12 or MRS]
	Bi-directional Differential Data Strobe
	Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
	On Die Termination using ODT pin
	Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C
	Asynchronous Reset
	PCB : Height 1.180” (30.00mm), double sided component

Tech Specs

	Brand: Kingston HyperX
	Model: KHX1333C7D3K3/6GX
	Type: 240-Pin DDR3 SDRAM
	Capacity: 6GB (3 x 2GB)
	Speed: DDR3 1333
	Cas Latency: 7
	Voltage: 1.65V
	ECC: No
	Buffered/Registered: Unbuffered
	Multi-channel Kit: Triple Channel Kit
	Heat Spreader: Yes
	Features: XMP Ready
	Manufacturer Parts Warranty: Lifetime limited
	Manufacturer Labor Warranty: Lifetime limited

Kingston HyperX 6GB (3 X 2GB) DDR3 CL7 1333MHz SDRAM 240-pin Desktop Memory - KHX1333C7D3K3/6GX

Product Summary

Rakuten