Ergotron LX Desk Mount LCD Arm - Black - 45-179-195

The unit is sturdy, easy to assemble, and easy to move. The arm is holding a 20" widescreen LCD with ease. I have regained about 4 square feet of usable desk space by taking the monitor off the desk and using this arm. It is easy to move in and out. Wish I had gotten this years ago.
 
Was this review helpful?    

I've wanted an LCD arm for a few years now but was deterred by the typical $300+ price tag. I've seen a few other arms for a lot less than this one, but I fear they would be difficult to use (requiring a tool to make any movements) or would lack in quality. Once my LCD arm arrived, I had it setup within an hour (most of which was clearing off my desk!). It was *very* simple and it works great! The plastic shielding feels sort of flimsy, but it seems pretty flexible, so I doubt it will break. I think I'll be purchasing two more of these. One for my 2nd monitor and one for my jealous girlfriend. I'm using this with a Dell 24" LCD (2405FPW)
 
Was this review helpful?    

As I had read in other reviews, this Ergotron product is well made with good material. I could assemble within a short time to lift my 22" NEC monitor. Manuals were helpful and well designed. You need them. Getting that balance of smooth movement back and forth, but not so loose that the gravity wins is a balancing act. Mine is still set to tighter side which needs hard push. Overall, I am satisfied with the product, even though it is kind of pricy.
 
Was this review helpful?    

I am completely satisfied with the purchase of this mount. It can hold my Samsung 24" 2493HM without a sweat. My lcd only supports 200x100mm though so I had to buy a $50 plate adapter that went from the mounts 75x75mm to the 200x100mm of my lcd. In the end the mount just feels very strong and sturdy while also allowing you to make quick smooth movements wherever you want the monitor positioned.
 
Was this review helpful?    

The Ergotron LX LCD arm was exactly what I needed to stop the neck and back pain I was starting to get at the end of each day. Moderately easy to install and very simple to use. I wish I had ordered this much sooner. Buy.com had the best price for this item. Regular shipping was quick (four days I think?). I use it with an Acer 22" monitor.
 
Was this review helpful?    

I bought this because of the adjustable tension arms. I had a desk mount from another manufacturer that could not be adjusted, and after six months or so, it would no longer hold position. This unit was reasonably easy to assemble and install. The instructions could be better. Tension adjustment is explained only in the notebook section.
 
Was this review helpful?    

The Arm is very solidly made and extremely sturdy. I have it mounted with the clamp and it holds my ViewSonic VX800 monitor beautifully. Although the monitor is an older one and slightly thicker (read: heavier) than the ones currently out, the arm holds it exactly where I put it. I did have to tighten the pivot joints a little to make it stay in place better, but that is part of the design. The extension is very good and I love the fact that I can pivot the screen and use it in a portrait direction for full page editing. For those who don't need all of the extension, the bar mounted on the pole (in the pic above) can be removed. Price here at Buy.com was excellent as well, and I did shop around.
 
Was this review helpful?    

I bought this to mount my Dell 2407 monitor. It works beautifully. It was easy to assemble and set up, and looks geat.
 
Was this review helpful?    

I'll agree with another reviewer: not a huge amount of space for running multiple cables inside the arms, but a pretty nice, well-balanced unit nonetheless. Seems very sturdy and solid. I'm using a pair of them on side-by-side 19" widescreen monitors in a video editing suite. Note that depending on how and where you mount the arm, you might need additional space behind the monitor for the arm's "elbow".
 
Was this review helpful?    

Bought to use with samsung 226 monitor and does a great job of allowing me to manage my desk space and works as advertised. Instructions are lacking as far as how to adjust one of the arms, but after some experimenting and adustment found the right combination. Because i was using on desk with 1 1/2 inch lip, instead of at least 2 1/4 inch, has to modify the handle to tighten. Cut off the extentions until they were less than 3/4 inch from center and tightened with vise grip. After this cutting of the handle the rest of the mounting on the desk went smoothly. Note: will swing back into wall behind and damage paint unless you get it situated the first time. Review was 4 for value and 3 for ease of use with the rest 5s.
 
Was this review helpful?    

I have a 24" Gateway Monitor with the speaker bar attached. I drilled a hole to mount the arm. After adjusting the tension screws using the provided tools it works perfectly. The cable management is ok but I have 5 cables running to my monitor so they don't all fit in the holder built into the arm. In addition the instructions are not very well written.... I used the Lego method for assembly, pictures only.
 
Was this review helpful?    

This is a good looking arm that meets 95% of my needs. I am using a 23 inch LCD with it. Easy to install, took maybe 10 min, easy to use but I cannot turn my screen 90 degrees. It turns but will not stay in place. I had watched an install video on another site that demonstrated this feature. Overall, worth the money and I am happy with it.
 
Was this review helpful?    

Setup was straightforward and simple, although my desk was too thick for the standard clamp. No matter, just remove the lower bracket, yank out the snap ring, reverse the clamp, replace the ring and you're good. Arm movement is pretty smooth, but extension movement could be smoother. Very sturdy, not too bad looking, either. Feels high quality, and the price is pretty good.
 
Was this review helpful?    

It is more than what I expected. It is well finished, and it is fully adjustable. I usually try to skip the instructions, but you need to read them in order to get it to stay the way you want. I am very happy with it. I was going to complain a little about the price, but once I took it out of the box, and starting using it, then I understood that the price is right. It clears my desk, and I don't have to go to the Chiropractor... It paid off after the first month! I bought it with a ViewSonic 22" LCD and it works great.
 
Was this review helpful?    

I am so pleased my Ergotron LX Desk Mount LCD Arm. I have looked everywhere trying to find just the right one. This one certainly fits the bill.
 
Was this review helpful?    

I purchased 2 arms for both of my Dell 24" monitors. After adjusting the tension in both arms they hold the monitors perfectly and are still very easily moved around. This was a great buy for me!
 
Was this review helpful?    

This arm very well built and strong. It is holding my 24" Dell screen without any issue. I am very satisfied with this item. Do not buy any other arms, this is the best out there. Strongly recommended.
 
Was this review helpful?    

Agree with all reviews that this is sturdy and very well-designed. Be aware when you install it that it protrudes into your desk space a LOT....but that's where their design excells because you can just use the portion of the support arm that attaches to the back of your monitor and slide that over the mounting pole that you install on your desk. With only one of the two arms, then you can mount/view your monitor as close as 12" from the wall (otherwise the full two-piece swivel mount sticks out over your desk much further). So be prepared to make some adjustments and even don't use one portion. (Note: this is NOT well-documented and I was preparing to send it back when I discovered this.)
 
Was this review helpful?    

The only con I have for this thing is the price. Other than that, this probably the best LCD mount on the market. I bought it mainly for its wide range of motion.
 
Was this review helpful?    

I couldn't be happier with the LCD arm. It puts my Acer monitor in a position where I can read it. It was easy to assemble.
 
Was this review helpful?    

I got this to support a 19" Samsung flat-panel and it worked right out of the box! No drooping or sagging, which was what I had feared after reading reviews for other desk mount arms. The instructions were pretty clear and in multiple languages. Since this arm went on the wall-edge of a desk that fits into a corner, I made sure to position the access hole on the ring that adjusts the height (on the vertical post clamped to the desk) so that I could get to it without having to unclamp the post. The cable concealment troughs did an admirable job with two cables (power and computer connection - no USB). There was a bunch of extra hardware that I didn't need (for attaching various types of monitors to the support arm, etc.). It works great and really cleans up the desk.
 
Was this review helpful?    

Ergotron continues to impress me with well thought out and constructed ergonomic products. This is my second LX stand. I have some of their more consumer oriented products and while sturdy they don't have the fit, finish and flexibility of the LX. The LX supports two different mounting options out of the box, and the stand has stood up to a year's worth of abuse with no real issues. The only fly in the ointment is that the provided cable routing system is inadequate for heavy duty cables and I ended up using a tie wrap to keep everything tidy.
 
Was this review helpful?    

<p> This unit is great. The only issue is the POOR documentation which makes no mention of the ability to adjust the tension or where that mechanism is located. </p><p> Good news is that it IS possible. At the first "joint" nearest to the back-plate which attaches to the monitor, you will notice a hole ... inside the hold is a screw. Using the supplied Allen wrench shaped like a "T", add/release tension as needed. Better to have more tension, before attaching your monitor, and then easing off once it's fully assembled and holding your monitor ... otherwise, it will likely sink like a rock and (hopefully) not hit anything on the way down towards your desk. </p><p> Once assembled, you'll find that this unit is of solid construction, attractive in design, and having a small foot-print at the attachment point to your desk. As others have indicated, there's no option for concealed cable management. </p><p> The unit comes complete with the screws, wrenches and monitor-plate ... for larger monitors whose pre-drilled holes are 100mm apart versus the 75mm distance on smaller monitors. </p><p> I use this to hold my Samsung 226BW 22" Wide-format FP which weighs a little over 16 lbs. I can hover the monitor over the top of my laptop, or off to the side, and then move it close to the wall / out of the kid's reach when I'm done with it. </p>
 
Was this review helpful?    

If you are tall ay 6 foot plus you will find that you are actully looking down at your monitor on your desk. With this LCA arm you put the monitor right where you need it. It is a little expensive. However I could not get my LCD right where I could use good posture. Now I have no problems. My back would hurt at the end of the day because I would hunch over to get a better look at the screen. If you are thinking about buying one, do it, ou wont regret it. About the product it self it is easy to install and well built. I am using it on a fold up table from Walmart and the tabe is really not sturdy enough because you get some wobble on the screen. I have been using this now for 2 weeks and can't imagine going back to not having it. I am using a 20inch viewsonic on it and it works fine. I didn't have any problems with adjustments as some people reported. Hope you enjoyed the review. It is a great product and I really recomend it to everyone. If the question you are asking yourself is "Do I really need this?" For me the answer is yes and no. You can live without it, but once you have one you really don't want to. God Bless,
 
Was this review helpful?    

I think it's overpriced, but it was cheaper at buy.com than anywhere else. It works beautifully with y Dell 2007WFP 23" monitor (no soundbar). I read a number of reviews and looked into other models and this one seemed to be the favorite. Those people were right. get it. You spent $$ on a good screen, so being able to position it wherever you want makes sense!
 
Was this review helpful?    

Will mount using either 75 x 75mm or 100 by 100mm hole spacing. Instructions were good. You most likely will have to adjust it to compensate for the weight of your display. Parts were well packaged, and of good quality.I would reccomend this product.
 
Was this review helpful?    

I bought 2 of these LCD monitor arms. They are of good quality and were easy to install (I opted to drill a hole in my desk to mount them, but I could have used the clamps). They are solid. No problem holding up a Viewsonic VG2021m and a Viewsonic VA912b. They are easy to manuever into any position. The arms have a long reach. My only complaint is they rotate from portrait to landscape too easily and there is no way to lock them level. Keeping them level when you adust them is difficult.
 
Was this review helpful?    

flexibility and range, well designed. Much better than their consumer level entry the Neoflex.
 
Was this review helpful?    

I have just bought my second stand, I was so happy with the first. My 19" 3:4 monitor required slight adjustment after assembly, my 20" widescreen's stand was perfectly adjusted right out of the box. Very easy to assemble and the suspension stays where you put it, no need to re-tighten so far, it's been six months and the stand gets swiveled & moved around every day. Very solid and professional. Only negative is cord-management clips don't do much to hide the cables...I used sleeving for an elegant look.
 
Was this review helpful?    

This is not one of those necessary things to own but once you get one for a your flat-screen monitor you'll be glad that you did, I'll call it a perk. I owned this monitor arm for about two weeks now & I'm so happy that I treated myself to it .. I have a Samsung 205BW so anyone who has one knows that the base is adjustable with a very sl