 | Active power factor Correction Protections:Over Power/Over Voltage/Short Circuits |
| Alarm Reset 100% burn-in test |
| Coolings: 38x38x28mmx4 DC FANS |
| Current Sharing design on +3.3V, +5V and +12V |
| Dimension(DxWxH): 300x101x84mm |
| Efficiency: 72% Typical at full load |
| EMI/RFI Standards:CISPR22(EN55022) Class A, FCC Part15 Class A |
| Front panel LED to Indicate Power Status |
| Harmonic: EN61000-3-2 |
| Holdup Time: 16m sec. minimum, at full load |
| Input Current: 12A For 115VAC, 6A For 230VAC |
| Input Frequency: 47Hz-63Hz |
| Input Voltage: 100-240VAC |
| MTBF: >100,000 hours |
| Noise bandwidth is from DC to 20MHz. |
| Operating Humidity: 20% to 90%,non-condensing |
| Operating Temperature: 0?C to 45?C |
| Output Current: +5V@32A, +12V@52A, -12V@1A, +3.3V@25A, +5VSB@3A |
| Over Power Protection: 110%-150% rated output power |
| Power Factor: >0.96@230VAC/50Hz, full load |
| Power Fail Delay: >1msec.,TTL compatible signal |
| Power Fault Alarm Signals |
| Power Good Signal: 100ms-500ms, TTL compatible signal |
| Power module Total output power not exceed 700W for TC-700RVN2 |
| PS-O N: Power off: PS-ON = 2V min.;Power on:PS-ON = 0.8V max. |
| Safety Standards: UL,cUL,TUV,CB |
| Short Circuit: Shut down o/p voltage, re-power on to recover |
| Storage Humidity: 5% to 95%, non-condensing |
| Storage Temperature: -20?C to +70?C |
| Total Max output of +5V AND +3.3V not exceed 200W |
| Universal AC input/Full range |
