| Product Summary | | Manufacturer: Cisco | | Mfg Part#: WAP4400N | | UPC: 00882658239939 | | Buy.com Sku: 202882380 | | Item#: CCQRR7 | | Buy.com Sales Rank: 77259 | | See more in Wireless Access Points (AP) | |
|
|
|
| | | | Product Guides | | | | With the growth in high-bandwidth applications, such as storage and video, in the workplace, network performance is essential. Wireless technology is no longer lagging behind wired performance. The Cisco® WAP4400N Wireless-N Access Point answers the growing business need for access, speed, and security.
The Cisco WAP4400N uses the latest wireless networking technology, Wireless-N (draft 802.11n). By overlaying the signals of multiple radios, Wireless-N's multiple-input, multiple-output (MIMO) technology multiplies the effective data rate. Unlike ordinary wireless networking technologies that are confused by signal reflections, MIMO actually uses these reflections to increase the range and reduce "dead spots" in the wireless coverage area.
The Cisco Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g), and Wireless-B (802.11b) devices to your wired network, so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes the access point easy to install - you can mount it anywhere, even without ready access to a power plug. With appropriate PoE support at the other end, you need to run only one cable to the access point to deliver both data and power. Of course, you can also use the included AC adapter if power is available nearby.
Moreover, the integrated quality of service (QoS) features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business-quality voice over IP (VoIP) and video applications.
To protect your data and privacy, the Cisco Wireless-N Access Point supports both Wired Equivalent Privacy (WEP) and the industrial-strength wireless security of Wi-Fi Protected Access (WPA), encoding all your wireless transmissions with powerful encryption. The MAC address filter with advanced logging lets you both control and stay apprised of who accesses your wireless network. Configuration is a snap with the web browser-based configuration utility.
The Cisco WAP4400N Wireless-N Access Point is the best way to add wireless access to your existing business network.
| | Features |  | Draft 802.11n wireless networking delivers greater throughput and extended range, maximizing the number of wireless clients per access point for your small business | | Full backward compatibility for 802.11b and 802.11g devices | | Easy installation and configuration via a web interface | | Supports WEP, WPA Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA2-ENT, and WPA-ENT authentication (802.11i ready) | | Adjustable dipole antennas with MIMO 2x3 diversity | | Gigabit Ethernet LAN interface | | Supports PoE or external DC power | | Supports Simple Network Management Protocol (SNMP) and features an intuitive web-based interface | | Wi-Fi Multimedia (WMM) wireless QoS | | Upgradable to 802.11e |
| | Tech Specs | | Standards: Draft IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE), 802.1x (security authentication); 802.11i ready (security WPA2), 802.11e ready (wireless QoS) | | Ports: Ethernet, Power | | Buttons: Reset | | Cabling type: Unshielded twisted pair (UTP) Category 5, Category 5 Ethernet or above for Gigabit Ethernet Interface | | LEDs: Power, Ethernet, Wireless, PoE | | Operating system: Linux | | Web user interface: Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) | | SNMP version: SNMP version 1, 2c, 3 | | Event logging: Event logging, Remote syslog | | Web firmware upgrade: Firmware upgradable through web browser | | Diagnostics: Flash, RAM, LAN, WLAN | | Dynamic Host Configuration Protocol (DHCP): DHCP client | | Access point: Access point mode | | Spec/modulation: Radio and modulation type: 802.11b/DSSS, 11g/OFDM, 11n/OFDM | | Channels: Operating channels: 11 North America, 13 most of Europe (ETSI and Japan) | | Internal antennas: None | | External antennas: 3 (omnidirectional) | | WEP/WPA/WPA2: WEP 64-bit/128-bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT | | Access control: Wireless connection control: MAC-based | | Service set identifier (SSID) broadcast: SSID broadcast enable/disable | | 802.1X: IEEE 802.1X support | | General: | | New access point detection (used with Cisco WPC4400N Wireless-N Business Notebook Adapter | | New client detection (used with Cisco WPC4400N) | | Auto-channel selection | | Dimensions: 7.80 x 5.16 x 7.80 in. | | Unit weight: 0.84 lb (38 g) | | Power: 12V 1A DC input, and IEEE 802.3af compliant PoE; Max power draw: 5.04W | | Certification: FCC, CE, IC | | Operating temperature: 32º to 104ºF (0º to 40ºC) | | Storage temperature: -4º to 158ºF (-20º to 70ºC) | | Operating humidity: 10% to 85% noncondensing | | Storage humidity: 5% to 90% noncondensing | | Minimum Requirements: | | 802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC | | Switch/router with PoE support or PoE injector when used with PoE | | Web-based configuration: Java-enabled web browser | | Product Warranty: 3-year limited hardware warranty with return to factory replacement and 90-day limited software warranty |
|
| |
|
|
__USERID__
http://www.buy.com/prod/cisco-wap4400n-wireless-n-access-point-poe-linksys-wap4400n-wireless-n/q/loc/101/202882380.html
Customers Who Bought This Item Also Bought.  |
