Cisco WAP200E Wireless-G Exterior Access Point with Power over Ethernet - High-Speed Wireless Access for Exterior Environments Cisco WAP200E Wireless-G Exterior Access Point - PoE
Earn Super Points: Write a Review
Wishlist
Share
Tweet
EARN 399 SUPER POINTS!
What's this?
Condition:
Brand New
In Stock
Usually Ships within 1 business day
Very few left In Stock! Order soon -- product may sell out.
12 New
for
$398.98
Marketplace Buying Choices
|
|
|
Product Summary
Manufacturer: Cisco
Mfg Part#: WAP200E
Buy.com Sku: 204769925
UPC: 745883578597
UPC 14: 00745883578597
Buy.com Sales Rank: 68853
See more in Access Points
Product Guides
| The Cisco® WAP200E Wireless-G Exterior Access Point (Figure 1) lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network, so you can add PCs to the network without the need for additional cabling. This weather-resistant access point creates a "wireless bubble" in exterior spaces, such as patios and outdoor cafés. Power over Ethernet (PoE) support makes it easy to install, and you can create multiple basic service set identifiers (BSSIDs) that connect to individual VLANs to keep your traffic separated.
The Cisco WAP200E is also ideal for use as a bridge to connect remote areas. For example, it could be used to connect offices with a warehouse housed in a separate building, or to connect the buildings of a college campus. Installing one access point on each building provides connections at up to Wireless-G speeds - with no cable to run. The weather-resistant housing protects the access point and is lightning protected. To protect your data and privacy, the Cisco WAP200E supports both Wired Equivalent Privacy (WEP) and the industrial-strength wireless security of Wi-Fi Protected Access (WPA), encoding all of your wireless transmissions with powerful encryption. The MAC address filter lets you decide who can access your wireless network, and advanced logging keeps you apprised of access attempts. Configuration is a snap with the web browser-based configuration utility. RangeBooster technology, a compatible add-on to standard Wireless-G, can nearly double the range of your wireless network and increase its throughput by up to 35 percent. Unlike ordinary wireless technologies that are confused by signal reflections, RangeBooster uses two smart receivers at each end to detect and decode reflected signals at distances where standard technologies give up. You'll find that "dead spots" in the wireless coverage area are reduced as well. The integrated quality of service (QoS) features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business-quality voice over IP (VoIP) and video applications. Additional features such as multiple BSSIDs, wireless roaming, and auto-channel selection make the Cisco WAP200E ideal for your business. |
Features
 |
Lightning-protected, weather-resistant housing |
|
10BASE-T/100BASE-TX Ethernet port, auto-sensing half/full duplex, and automatic medium dependent interface (MDI) and MDI crossover (MDI-X) |
|
Built-in 6-dBi directional antenna with 1x2 multiple-input, multiple-output (MIMO) to increase coverage |
|
Obtains power via 802.3af PoE from a PoE switch or power injector |
|
Simplified web interface for installation and configuration |
|
802.1X RADIUS authentication |
|
Supports WEP, WPA Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA Enterprise, and WPA2 Enterprise wireless security |
|
Supports four BSSIDs and 802.1Q VLAN to service set identifier (SSID) mapping |
|
Supports Simple Network Management Protocol (SNMP) and uses an intuitive web-based interface |
|
Supports Wi-Fi Multimedia (WMM) wireless QoS |
|
Supports wireless roaming based on 802.11F (Inter-Access Point Protocol [IAPP]) |
|
Offers access point, bridge mode, and repeater mode |
|
Supports wireless security monitoring (working together with Cisco WMP200, WPC200, and WUSB200 adapter cards) |
|
Supports wireless client isolation |
Tech Specs
|
Standards: IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE), 802.1p (QoS priority), 802.1Q (VLAN), 802.1X (security authentication), 802.11i ready (security WPA2), 802.11e ready (WMM and unsolicited automatic power save delivery [U-APSD]), 802.11F (wireless roaming) |
|
Ports: 1 Ethernet, 1 external antenna |
|
Buttons: Reset |
|
Cabling type: Unshielded twisted pair (UTP) Category 5 |
|
LEDs: Power, Ethernet, Wireless |
|
Operating system: Linux |
|
Web user interface: Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) |
|
Static IP: Yes |
|
Dynamic Host Configuration Protocol (DHCP) client: Yes |
|
SNMP versions: 1, 2, and 2c |
|
Event logging: Yes |
|
Web firmware upgrade: Yes |
|
Diagnostics: Flash, RAM, LAN, WLAN |
|
Access point: Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode |
|
Spec/modulation: 802.11b/direct sequence spread spectrum (DSSS), 802.11g/orthogonal frequency division multiplexing (ODFM) |
|
Data rates: 802.11b: 1, 2, 5.5, 11 Mbps; 802.11g: 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps |
|
Channels: 11 North America, 13 Europe (ETSI and Japan) auto-channel selection |
|
Number of internal antennas: 2 at 6 dBi (directional) |
|
Antenna connector type: Reverse polarity female N-type |
|
Detachable antenna: Yes (sold separately) |
|
RF power (Effective Isotropic Radiated Power [EIRP]): 802.11g: typical 16.5 dBm, 802.11b: typical 17 dBm |
|
Antenna gain: Internal antenna: 6 dBi |
|
Adjustable power: Yes |
|
Receiver sensitivity: 802.11g: 54 Mbps at -65 dBm, 802.11b: 11 Mbps at -85 dBM |
|
WEP/WPA/WPA2: WEP, WPA-PSK, WPA2-PSK, WPA Enterprise, WPA2 Enterprise |
|
Connection control: Wireless connection control: MAC based |
|
SSID broadcast: SSID broadcast enable/disable |
|
802.1X: IEEE 802.1X support |
|
Wireless client isolation: Wireless client devices can be isolated from each other either within an SSID or between 2 SSIDs; both isolation modes can be enabled at the same time. |
|
Web-based utility access control: HTTP/HTTPS, wireless client web GUI access control |
|
WEP bitsL: 64, 128 |
|
WPA bits and parameters: 128 - Temporal Key Integrity Protocol (TKIP)/Advanced Encryption Standard (AES) |
|
WPA2 bits and parameters: 256 - AES |
|
SSID broadcast on/off: Yes |
|
Client isolation: Yes |
|
MAC-based wireless connection control: Yes |
|
Wireless web GUI access on/off: Yes |
|
Dimensions: 6.42 x 8.07 x 2.17 in. |
|
Unit weight: 2.47 lb (1.121 kg) |
|
Mounting options: Industrial-strength, weather-resistant housing, lightning protection for outdoor enclosure, ceiling or wall mountable |
|
Power: 48V DC; Maximum power draw: 4.8W |
|
PoE in: Yes |
|
Certification: FCC, IC,CE |
|
Operating temperature: -4º to 140ºF (-20º to 60ºC) |
|
Storage temperature: -4º to 140ºF (-20º to 60ºC) |
|
Operating humidity: 5% to 95%, noncondensing |
|
Storage humidity: 5% to 95%, noncondensing |
|
Minimum Requirements: |
|
802.11b or 802.11g wireless adapter with TCP/IP installed per PC |
|
Switch/router with PoE support or PoE injector |
|
Web-based configuration: Java-enabled web browser |
|
Product Warranty: 3-year limited hardware warranty with return to factory replacement and 90-day limited software warranty |
Related Products
Feedback
