Cisco WAP2000 Wireless-G Access Point with Power over Ethernet - RangeBooster Wireless Access Point Extends Network Connectivity Cisco WAP2000 Wireless-G Access Point - PoE
Earn Super Points: Write a Review
Wishlist
Share
Tweet
EARN 148 SUPER POINTS!
What's this?
Marketplace Buying Choices
|
|
|
Product Summary
Manufacturer: Cisco
Mfg Part#: WAP2000
Buy.com Sku: 206178322
UPC: 745883578337
UPC 14: 00745883578337
Buy.com Sales Rank: 68853
See more in Access Points
Product Guides
| The Cisco® WAP2000 Wireless-G Access Point is ideal for small businesses that want to expand their existing wired networks or create new wireless networks for their workforce or guests. It features RangeBooster technology that is comparable to standard 802.11g but with nearly twice the range and with throughput that is up to 35 percent faster. Unlike ordinary wireless technologies that are hampered by wireless signals that reflect off walls, ceilings, and other objects, RangeBooster uses these multiple signals with two smart receivers at each end (router or access point and client adapter) to boost range and throughput speeds. As a result, a RangeBooster solution reduces or eliminates wireless signal dead spots in offices and other buildings so users can connect to the network in more areas. The Cisco WAP2000 comes with two 3-dBi for increased power, also helping to extend the range of the access point.
Advanced security features such as Wi-Fi Protected Access™ (WPA2) make this solution ideal for your business. Integrated quality of service (QoS) features provide consistent voice and video quality on both the wired and wireless networks, enabling your workforce to communicate or view video content without disruptions and delay. The Cisco WAP2000 can be powered from the included AC adapter or from a Power over Ethernet (PoE) switch via Ethernet cabling, enabling it to be mounted in ceilings or high on walls where power outlets may not be available. Additional features like multiple basic service set identifiers (BSSIDs), wireless roaming, and auto-channel selection give your business added flexibility to keep employees and guests connected. The Cisco WAP2000 also features dual firmware images, so it remains functional if a firmware upgrade process is disrupted. |
Features
 |
10BASE-T/100 BASE-TX Ethernet port, auto-sensing half/full duplex, and automatic medium dependent interface (MDI) and MDI crossover (MDI-X) detection |
|
Full backward compatibility with 802.11b |
|
Easy installation and configuration via a web Interface |
|
Dual images for resilient firmware upgrades |
|
Supports Wired Equivalent Privacy (WEP), WPA Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, and WPA2-ENT authentication (802.11i ready) |
|
SMA detachable dipole antennae with 1x2 multiple-input, multiple-output (MIMO) to increase coverage |
|
Supports PoE or external DC power |
|
Supports 4 BSSIDs and 802.1Q VLAN to service set identifier (SSID) mapping |
|
Supports Simple Network Management Protocol (SNMP) and uses an intuitive web-based interface |
|
Wi-Fi Multimedia (WMM) wireless QoS support, upgradable to 802.11e |
|
Supports wireless roaming based on 802.11F (Inter-Access Point Protocol [IAPP]) |
|
Supports access point mode, bridge mode, and repeater mode |
|
Supports wireless client isolation |
|
Metal casing |
Tech Specs
|
Standards: IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE), 802.1p (QoS priority), 802.1Q (VLAN), 802.1X (security authentication), 802.11i ready (security WPA2), 802.11e ready (wireless QoS), 802.11F (wireless roaming) |
|
Ports: 10BASE-T/100BASE-TX Ethernet, 12V DC power |
|
Buttons: Reset |
|
Cabling type: Unshielded twisted pair (UTP) Category 5 |
|
LEDs: Power, PoE, Wireless, Ethernet |
|
Operating system: Linux |
|
Web user interface: Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) |
|
SNMP version: SNMP version 1, 2c, 3 |
|
Event logging: Email notification, Remote syslog |
|
Web firmware upgrade: Firmware upgradable through web browser |
|
Diagnostics: Flash, RAM, LAN, WLAN |
|
Dynamic Host Configuration Protocol (DHCP): DHCP client |
|
Access point: Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode |
|
Spec/modulation: Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM |
|
Channels: Operating channels: 11 North America, 13 most of Europe (ETSI and Japan) |
|
Internal antennas: None |
|
External antennas: 2 (omnidirectional) 3 dBi SMA detachable |
|
Transmit power: Transmit power (adjustable) @ normal temp range: 802.11b: 18 dBm; 802.11g: 16 dBm |
|
Antenna gain in dBi: 3 |
|
Receiver sensitivity: 802.11.g: 54 Mbps @ -72 dBm, 802.11.b: 11 Mbps @ -85 dBM |
|
WEP/WPA/WPA2: WEP 64-bit/128-bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT |
|
Access control: Wireless connection control: MAC-based |
|
SSID broadcast: SSID broadcast enable/disable |
|
802.1X: IEEE 802.1X support |
|
Wireless client isolation: Wireless client devices can be Isolated from each other either within an SSID or between 2 SSIDs |
|
Dimensions: 8.66 x 6.69 x 1.50 in. |
|
Weight: 1.69 lb (0.765 kg) |
|
Power: 12V 1A DC input, and IEEE 802.3af compliant PoE max power draw: 3.48W |
|
Certification: FCC, ICES 003, CE |
|
Operating temperature: 14º to 131ºF (-10º to 55ºC) |
|
Storage temperature: -22º to 158ºF (-30º to 70ºC) |
|
Operating humidity: 10% to 90%, noncondensing |
|
Storage humidity: 5% to 95%, noncondensing |
|
Minimum Requirements: |
|
802.11b, 802.11g wireless adapter with TCP/IP protocol installed per PC |
|
Switch/router with PoE support or PoE injector when used with PoE |
|
Web-based configuration: Java-enabled web browser |
|
Product Warranty: 3-year limited hardware warranty with return to factory replacement and 90-day limited software warranty. |
Related Products
Feedback
