 | PSTN (FXO) Telephony: |
| 4 FXO ports (RJ-11) |
| VoIP to PSTN and PSTN to VoIP Call Origination and Termination |
| 4 simultaneous active calls |
| Caller ID support - Bellcore, ETSI FSK (DTAS and RP-AS), ETSI DTMF and UK. |
| Call Progress Tone Generation |
| Universal Tone Configuration for Progress and Disconnect tones |
| FXO port impedance configuration - 16 settings |
| FXO port Attenuation/Gain Adjustments |
| Trunk group configuration of FXO ports with SPA9000 |
| Call Disconnect detection via Disconnect Tone, CPC, Polarity reversal and idle time. |
| Ring Frequency, Impedance, Validation Time, Voltage and Indication Delay Configuration |
| Line-in Use Voltage Setting |
| Operational Loop Current Minimum Value |
| On-hook speed setting |
| PSTN Answer Delay |
| PSTN Call Limit |
| DTMF tone length configuration |
| DTMF level setting |
| Dial out delay |
| Dial out battery threshold |
| IP Telephony: |
| SIP Registrar Agent (RFC 3261) |
| One SIP trunk towards SPA9000 |
| Direct Inward/Outward Dialing with SPA9000 |
| G.711 a/u and G.729a |
| DTMF in-band support (RFC 2833) |
| Adaptative Jitter Buffer |
| Frame Loss Concealment |
| Echo Cancellation (G.165/G.168) |
| Voice Activity Detection with Silence Suppression |
| Voicemail Server: |
| 32 Voice mail Accounts |
| USB 1.1 Host Interface for the Voicemail Prompts and Messages |
| Up to 3.8 hours of message storage with default configuration (USB Memory) |
| International language support (see Localization section) |
| Security: |
| Password Protected Admin and User Access Authority |
| Password Protected Voicemail access |
| Provisioning, Administration and Maintenance: |
| Configurable by the Cisco SPA9000 Configuration Wizard |
| Administration and Configuration via Integrated Web Server |
| Event Logs (Events, Errors, Fatal Errors) |
| Syslog reporting |
| Network: |
| DHCP Client and static IP addressing |
| Differentiated Services (Diffserv)/TOS packet marking |
| NTP-based Date and time with Daylight Savings support |
| Onboard Ethernet Ports: One 10/100 Mbps WAN uplink (for switch connectivity) |
| PSTN FXO ports: 4 Built-in FXO ports |
| Voicemail ports: |
| 1 USB 1.1 Host Port for Voicemail prompts and storage |
| 32 voicemail accounts |
| Two ports when SPA400 is used also for PSTN gateway |
| Ten ports when SPA400 is dedicated to Voicemail Server only |
| Power Supply: External, 100-240 VAC, 50 to 60 Hz (26-34 VA) |
| DC Input Voltage (SPA9000): +5 VDC |
| DC Input Current (SPA9000): 2A max |
| Power consumption: 5 Watts |
| Operating Temperature: 32 to 113ºF (0 to 45ºC) |
| Non Operating Temperature: 14 to 185ºC (-10 to 70ºC) |
| Operating Humidity: 10 to 85% Non-condensing, non-operating |
| Dimensions: 5.51 x 5.51 x 1.06 in. |
| Weight: 0.5 lb |
| Product Warranty: 1-year limited hardware warranty with return to factory replacement and 90-day limited software warranty |
