Wishlist
Share It
Tweet It
EARN 50 SUPER POINTS!
What's this?
Condition:
Brand New
In Stock
Usually Ships within 24 hours
Very few left In Stock! Order soon -- product may sell out.
Product Summary
Product Guides
| The Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports enables high-quality feature-rich VoIP service through your broadband Internet connection. Just plug it into your home router or gateway and use the two standard telephone ports to connect analog phones or fax machines. Each phone port operates independently, with separate phone service and phone numbers, like having two telephone lines. You'll get clear reception and reliable fax connections, even while using the Internet.
With Internet telephony, along with low domestic and international phone rates, impressive arrays of special telephone features are available. Choose your preferred local dialing number, regardless of where you live. Or add a virtual telephone number to have forwarded to your Internet phone. You can even add a toll-free number. The Cisco PAP2T Internet Phone Adapter is compatible with these and all of the other special telephone features that are available from your Internet telephone service provider, such as caller ID, call waiting, voicemail, call forwarding, distinctive ring, and much more. |
Features
 |
Two voice ports (RJ-11) for analog phones or fax machines |
|
Impedance agnostics - eight configurable settings |
|
Call waiting, cancel call waiting, call waiting caller ID |
|
Caller ID with name/number (multinational variants) |
|
Caller ID blocking |
|
Call forwarding: no answer, busy, all |
|
Do not disturb |
|
Call transfer |
|
Three-way conference calling with local mixing |
|
Message waiting indication - visual and tone based |
|
Call return |
|
Call back on busy |
|
Call blocking with toll restriction |
|
Delayed disconnect |
|
Distinctive ringing - calling and called number |
|
Off-hook warning tone |
|
Selective/anonymous call rejection |
|
Hot line and warm line calling |
|
Speed dialing of eight numbers/addresses |
|
Music on hold |
Tech Specs
|
Data networking: |
|
MAC address (IEEE 802.3) |
|
IPv4 (RFC 791) upgradeable to v6 (RFC 1883) |
|
Address Resolution Protocol (ARP) |
|
DNS-A record (RFC 1706), SRV record (RFC 2782) |
|
Dynamic Host Configuration Protocol (DHCP) client (RFC 2131) |
|
Internet Control Message Protocol (ICMP) (RFC 792) |
|
TCP (RFC 793) |
|
User Datagram Protocol (UDP) (RFC 768) |
|
Real Time Protocol (RTP) (RFC 1889) (RFC 1890) |
|
Real Time Control Protocol (RTCP) (RFC 1889) |
|
Differentiated Services (DiffServ) (RFC 2475), type of service (ToS) (RFC 791/1349) |
|
Simple Network Time Protocol (SNTP) (RFC 2030) |
|
Voice gateway: |
|
Session Initiation Protocol (SIP) v2 (RFC 3261, 3262, 3263, 3264) |
|
SIP proxy redundancy - dynamic via DNS SRV, A records deregistration with primary SIP proxy server |
|
SIP support in network address translation (NAT) networks (including Serial Tunnel [STUN]) |
|
Highly secure (encrypted) calling via prestandard implementation of Secure RTP |
|
Codec name assignment |
|
Voice algorithms: |
|
G.711 (A-law and ยต-law) |
|
G.726 (16/24/32/40 kbps) |
|
G.729 A |
|
G.723.1 (6.3 kbps, 5.3 kbps) |
|
Dynamic payload |
|
Adjustable audio frames per packet |
|
Fax capability: |
|
Fax tone detection pass-through |
|
Fax pass-though - using G.711 |
|
Dual-tone multifrequency (DTMF): in-band and out-of-band (RFC 2833) (SIP info) |
|
Flexible dial plan support with interdigit timers and IP dialing |
|
Call progress tone generation |
|
Jitter buffer - adaptive |
|
Frame loss concealment |
|
Full duplex audio |
|
Echo cancellation (G.165/G.168) |
|
Voice activity detection (VAD) with silence suppression |
|
Attenuation/gain adjustments |
|
Flash hook timer |
|
Message waiting indicator (MWI) tones |
|
Visual messaging waiting indicator (VMWI) via frequency shift keying (FSK) |
|
Polarity control |
|
Hook flash event signaling |
|
Caller ID generation (name and number) - Bellcore, DTMF, European Telecommunications Standards Institute (ETSI) |
|
Music on hold client |
|
Streaming audio server - up to 10 sessions |
|
Security: |
|
Password-protected system reset to factory default |
|
Password-protected administrator and user access authority |
|
Provisioning/configuration/authentication: |
|
HTTPS with factory-installed client certificate |
|
HTTP digest - encrypted authentication via MD5 (RFC 1321) |
|
Up to 256-bit Advanced Encryption Standard (AES) encryption |
|
Provisioning, administration, and maintenance: |
|
Web browser administration and configuration via integral web server |
|
Telephone keypad configuration with interactive voice prompts |
|
Automated provisioning and upgrade via HTTPS, HTTP, Trivial File Transfer Protocol (TFTP) |
|
Asynchronous notification of upgrade availability via NOTIFY |
|
Nonintrusive, in-service upgrades |
|
Report generation and event logging |
|
Stats in BYE message |
|
Syslog and debug server records - per-line configurable web browser |
|
Physical interfaces: |
|
One 10BASE-T RJ-45 Ethernet port (IEEE 802.3) |
|
2 RJ-11 FXS phone ports - for analog circuit telephone device (tip/ring) |
|
Subscriber line interface circuit (SLIC): |
|
Ring voltage: 40-55 volts root mean square (Vrms) configurable * |
|
Ring frequency: 10-40 Hz * |
|
Ring waveform: trapezoidal and sinusoidal * |
|
Maximum ringer load: 3 ringer equivalence numbers (RENs) |
|
On-hook/off-hook characteristics: |
|
On-hook voltage (tip/ring): -50V nominal |
|
Off-hook current: 25 mA min |
|
Terminating impedance: 8 configurable settings, including North America 600 ohms, European CTR21 |
|
Regulatory compliance: FCC (Part 15, Class B), cUL, CE, IC-003, A-Tick |
|
Power supply: |
|
DC input voltage: +5V DC at 2.0A max. |
|
Power consumption: 5W |
|
Switching type (100-240V) automatic |
|
Power adapter: 100-240V - 50-60 Hz (26-34 VA) AC input, 1.8 m cord |
|
Indicator lights/LED: Phone1, Phone2, Internet, Power |
|
Documentation: |
|
Quick-start installation and configuration guide |
|
User guide |
|
Administration guide - service providers only |
|
Provisioning guide - service providers only |
|
Dimensions: 3.98 x 3.98 x 1.10 in. |
|
Unit weight: 5.40 oz (153 g) |
|
Operating temp.: 32ยบ to 113ยบF (0ยบ to 45ยบC) |
|
Storage temp.: -77ยบ to 158ยบF (-25ยบ to 70ยบC) |
|
Operating humidity: 10% to 90% noncondensing |
|
Storage humidity: 10% to 90% noncondensing |
|
Product Warranty: 1-year limited hardware warranty with return to factory replacement and 90-day limited software warranty |
Related Products
