 | Memory | | 128KB Buffer Memory per Port Installed |
| Interfaces/Ports | | 48 x 10/100Base-TX LAN |
| Management | | ETHERLIKE-MIB (RFC 1643) IF-MIB (RFC 1573) Bridge MIB (RFC 1493) CISCO-STACK-MIBCISCO-VTP-MIB CISCO-CDP-MIB RMON MIB (RFC 1757) CISCO-PAGP-MIB CISCO-STP-Extensions-MIB CISCO-VLAN-Bridge-MIB CISCO-VLAN-Membership-MIB CISCO-UDLDP-MIB CISCO-ENTITY-FRU-CONTROL-MIB CISCO-COPS-CLIENT-MIB ENTITY-MIB (RFC 2037) HC-RMON RFC1213-MIB (MIB-II) SMON-MIB |
| Manufacturer | | Cisco Systems, Inc |
| Additional Information | | Forwarding architecture: Use centralized CEF forwarding Distributed forwarding upgrade: None; Classic interface modules cannot be upgraded for distributed forwarding Primary Applications: Base Wiring Closet Interface Module Class: Classic Backplane Connection: Bus Queues per Port (Tx = Transmit, Rx = Receive): Tx-2q2t, Rx-1q4t Voice-capable modules upgradable to Cisco Inline Power or 802.3af Performance/ Forwarding Rate (Mpps): 32 Gbps; 15 Mpps per system Forwarding Engine Architecture: Supervisor engine CPU makes forwarding decision DFC Upgrade Requirements: Not supported Fabric Connections: 32 Gbps shared bus connection (on Supervisor Engine1A, Supervisor Engine 2, and Supervisor Engine 720) Scheduler: Weighted Round Robin (WRR)Inline Power: Yes
Port Density/Chassis Model: 576 ports (Cisco Catalyst 6513) 384 ports (Cisco Catalyst 6509) |
| Manufacturer Part Number | | WS-X6148-RJ-45= |
| Standard Warranty | | 90 Day Limited |
| Status Indicators | | StatusLink good |
| Interfaces/Ports Details | | 48 x RJ-45 Female 10/100Base-TX LAN |
| Connectivity Media | | Category 5 UTP
Category 5e UTP
Category 6 UTP
100 ohm STP |
| Dimensions | | 1.2" Height x 14.4" Width x 16" Depth |
| Temperature | | 32 F (0 C) to 104 F (40 C) Operating
-40 F (-40 C) to 167 F (75 C) Storage |
| Distance Support | | 328 ft Category 5 UTP Full-duplex
328 ft Category 5e UTP Full-duplex
328 ft Category 6 UTP Full-duplex
328 ft 100 ohm STP Full-duplex |
| Humidity | | 10% to 90% Non-condensing Relative Humidity |
| Shipping Dimensions | | 7.75" Height x 21.75" Width x 22.5" Depth |
| Manufacturer Website Address | | www.cisco.com |
| System Requirements | | Slot requirements:Can occupy any slot in any Cisco Catalyst 6500 Series chassis |
| Altitude | | -196.84 ft to 13123.32 ft Operating |
| Compatibility | | Cisco Catalyst 6500 Series
Supervisor Engine Supported:Supervisor Engine 1ASupervisor Engine 2Supervisor Engine 720 |
| Data Transfer Rate | | 10Mbps Ethernet Half/Full-duplex @ 328 ft
100Mbps Fast Ethernet Half/Full-duplex @ 328 ft |
| Product Series | | 6500 |
| Certifications & Standards | | Standard Network Protocols:Ethernet: IEEE 802.3, 10BASE-T Fast Ethernet: IEEE 802.3, 100BASE-TX, and 100BASE-FX IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3ad
Safety Compliance:UL 1950CSA-C22.2 No. 950 EN 60950 IEC 950 AS/NZS 3260 IEC 825 EN 60825 21CFR1040
EMC Compliance:FCC Part 15 (CFR 47) Class A VCCI Class A with UTP, Class B with STP EN55022 Class A with UTP, Class B with STP CISPR 22 Class A with UTP, Class B with STP CE marking AS/NZS 3548 Class A with UTP, Class B with STP |
| Shipping Weight | | 12 lb |
| Product Name | | Catalyst 6500 48-Port 10/100 Fast Ethernet Module |
| Product Type | | Switching Module |
