 | Data Transfer Rate | | 3Gbps External Maximum SAS
98MBps Sustained Maximum |
| Storage Capacity | | 73.5GB |
| Manufacturer | | Maxtor Corporation. |
| Temperature | | 5 °C to 55 °C Operating
-40 °C to 70 °C Non-operating |
| Heads | | 4 Physical |
| Standard Warranty | | 5 Year(s) Limited |
| Shock Tolerance | | 63Gs @ 2 ms Read Operating
30Gs @ 2 ms Write Operating
250Gs @ 2 ms Non-operating |
| Input Voltage | | 5 V DC or 12 V DC ±5% |
| Rotational Speed | | 15000 rpm |
| Additional Information | | SAS Interface Bandwidth: 600 MB/sBytes Per Sector: 512, 514, 516, 518, 520, 522, 524MTTF: 1.4 million hoursCase Temperature: 60 (°C) Maximum OperatingRotational Vibration: 25 (rad/sec2) OperatingRotational Shock:7,000 (rad/sec2) Operating25,000 (rad/sec2) Non-OperatingHigher System Availability:Dual port provides two data paths to each disk drive increasing the drive's availabilityMulti-initiator capability enables multiple hosts to access a drive simultaneouslyPoint-to-point connectivity for better fault isolationEnd User Flexibility:Configuration flexibility allow end-users to mix and match SAS and SATA drives to fit their specific applicationSAS back-planes can accommodate dual port / high performance SAS drives and/or high capacity / lower cost SATA drivesPerformance:Up to 128 queue depth support for improved IOPS performanceFull duplex capability allow drives to send and receive data for two different IO operations simultaneouslyPoint-to-point connectivity eliminates the bottleneck inherent with a shared/arbitrated busScalable bandwidth via wide portsRate matching supports 1.5Gbs SATA and 3.0Gbs SAS drives for optimal performanceSCSI Investment Protection:Employs the SCSI command set to maintain compatibility with existing SCSI infrastructuresMaxAdapt Features:Adaptive Bias Estimation (ABE)-Maintains consistent performance by adjusting the bias applied to the actuatorVirtual Cache Lines (VCL)-Allows dynamic assignment of cache segmentsRotational Vibration Compensation (RVC)-Monitors and corrects for external vibrationAtlas 10K V SAS Best-Fit:Large Enterprise NAS/SAN ServersServersMainstream NAS/SANWorkstationsDirect Attached JBOD StorageDirect Attached RAID Storage |
| Humidity | | 5 to 95% Non-condensing Operating
5 to 95% Non-condensing Non-operating |
| Manufacturer Part Number | | 8E073S0 |
| Form Factor | | 3.5" 1/3H Internal |
| Vibration Tolerance | | 1.5Gs 5 Hz to 500 Hz Operating
2Gs 5 Hz to 500 Hz Non-operating |
| Dimensions | | 1.028" Height x 4.0" Width x 5.787" Depth |
| Seek Time | | 3.1 ms Read Average
3.5 ms Write Average
0.3 ms Track-to-Track Read
0.5 ms Track-to-Track Write
8.0 ms Full-stroke Read
9.0 ms Full-stroke Write |
| Parts Warranty/Labor | | 5 Year(s) |
| Interfaces/Ports | | 2 x 7-pin SAS 300 Serial Attached SCSI |
| Altitude | | -1000 ft to 10000 ft Operating
-1000 ft to 40000 ft Non-operating |
| Data Error Rate | | < 10/10E12 bits Read Recoverable
< 1/10E15 bits Read Non-recoverable
< 10/10E8 bits Read Seek Error |
| Discs/Platters | | 2 |
| Product Line | | Atlas |
| Sound Emission | | 36 dB Idle (Operating) |
| Latency | | 2 ms Average |
| Weight | | 2.0 lb Maximum |
| Bytes per Sector | | 512 |
| Buffer | | 16MB |
| Power Consumption | | 12.66W Idle |
| Certifications & Standards | | S.M.A.R.T |
| Start/Stop Cycles | | 50000 |
| Product Name | | Atlas 15K II SAS Hard Drive |
